Saving image noise and sharpening parameters

general questions about Neat Image
Post Reply
JimmyCat
Posts: 10
Joined: Tue Feb 11, 2014 6:05 am

Saving image noise and sharpening parameters

Post by JimmyCat »

Is it possible to save the NI settings so that if you want to come back and tweak, say, the noise or sharpening that you can pick up where you left off e.g. I export a TIFF from Lightroom, work on that TIFF in NI then export it as a JPEG. Sometimes I may want to change the dimensions of the image which I do in LR then repeat the above export and want to apply the same noise reduction and sharpening that I have achieved previously.
Or to put it another way, is it possible to see what sharpening/noise reduction has been applied to any image processed in NI?
NITeam
Posts: 3173
Joined: Sat Feb 01, 2003 4:43 pm
Contact:

Post by NITeam »

NI processing parameters are not saved into the output image.

You can manually save the noise profile and filter settings to the disk when NI is open. Later you can re-open them to process the same image again or to apply the same noise reduction to another image.

Please note that if you change the size of the image then its noise also changes so it will require building a new noise profile.

Vlad
Post Reply