GPU speed database

questions about practical use of Neat Video, examples of use
Fifonik
Posts: 64
Joined: Sat Apr 14, 2012 1:51 am
Location: Australia, Brisbane

Re: GPU speed database

Post by Fifonik » Tue May 14, 2019 12:24 pm

[+] Implemented 'Spatial Frequencies'
[+] Added frame size '3840x2160 p'
[+] Added some v5 results for my RX 470 (I noticed that for my GPU enabling Very Low Frequency is only slightly affected processing speed. Not sure if such results should be separated...)

Ozone
Posts: 2
Joined: Mon May 20, 2019 11:48 am

Re: GPU speed database

Post by Ozone » Tue May 21, 2019 2:21 pm

My topics on other forums:
http://forum.benchmark.pl/topic/282854- ... -zestawów/ (mostly v5 results)
https://linustechtips.com/main/topic/91 ... t-12576311 (mostly v4 results)

6700k @ stock
24GB dual channel 2133 ddr4 ram

Code: Select all

Neat Bench (Neat Image 8.5.0, Neat Video 5.0.0) x64
Copyright (c) 1999-2019 Neat Image team, Neat Video team, ABSoft.
All Rights Reserved.

GPU detection log:

CUDA driver version: 9010
NVIDIA CUDA initialized successfully.
Checking CUDA GPU #1:
GPU device name is: GeForce GTS 450
512 MB total (373 MB available during initialization)
Unsupported compute capability: 2.1
Check failed - will not use the device

Failed to initialize OpenCL.
If you use an AMD card, please install the latest AMD driver with OpenCL support.

Neat Video benchmark:

Frame Size:	1920x1080 progressive
Bitdepth:	32 bits per channel
Mix with Original:	Disabled
Temporal Filter:	Enabled
    Quality Mode:	Normal
    Radius:	2 frames
    Dust and Scratches:	Disabled
    Repeat Rate:	0% of repeated frames
    Jitter Filtration:	Normal
Spatial Filter:	Enabled
    Quality Mode:	Normal
    Frequencies:	High, Mid, Low, Very Low
    Artifact Removal:	Enabled
    Edge Smoothing:	Disabled
    Sharpening:	Disabled


Detecting the best combination of performance settings:
running the test data set on up to 8 CPU cores

1 core: 3.08 frames/sec
2 cores: 6.12 frames/sec
3 cores: 7.87 frames/sec
4 cores: 8.22 frames/sec
5 cores: 8.12 frames/sec
6 cores: 7.19 frames/sec
7 cores: 6.59 frames/sec
8 cores: 6.28 frames/sec

Best combination: 4 cores: 8.22 frames/sec

Fifonik
Posts: 64
Joined: Sat Apr 14, 2012 1:51 am
Location: Australia, Brisbane

Re: GPU speed database

Post by Fifonik » Wed May 22, 2019 2:12 am

I think I can copy/paste these results into the database :)

UPDATE
Done (skipped two posts as there were no NeatVideo version in posts)
Thanks for the information.

Ozone
Posts: 2
Joined: Mon May 20, 2019 11:48 am

Re: GPU speed database

Post by Ozone » Wed May 22, 2019 10:15 am

Question to NVTeam- How hard would it be to add info about the used CPU, clock speed, ammount of ram and it's clocks, single/dual/tripple etc channel to the neatbench? I think that everyone would benefit from it.

NVTeam
Posts: 2395
Joined: Thu Sep 01, 2005 4:12 pm
Contact:

Re: GPU speed database

Post by NVTeam » Wed May 22, 2019 10:38 am

It would not be easy to keep current and accurate.

There are specialized tools for such kind of hardware information reporting. It is best to leave that job to those tools, they can do that more accurately.

Fifonik
Posts: 64
Joined: Sat Apr 14, 2012 1:51 am
Location: Australia, Brisbane

Re: GPU speed database

Post by Fifonik » Fri May 24, 2019 6:36 am

I think, detecting all these frequencies & timings are overkill for such tool.
However, as Windows 10 is already detecting CPU (and shows in Settings | System | About) it might be possible to get this information somehow and include into the log.
Just an idea.

Fifonik
Posts: 64
Joined: Sat Apr 14, 2012 1:51 am
Location: Australia, Brisbane

Re: GPU speed database

Post by Fifonik » Wed Jun 12, 2019 10:37 am

[*] Added option to combine results with different spacial frequencies. Enabled by default (as before previous changes).
[*] Some UI bugfixes

NVTeam
Posts: 2395
Joined: Thu Sep 01, 2005 4:12 pm
Contact:

Re: GPU speed database

Post by NVTeam » Wed Jun 12, 2019 10:56 am

Thank you very much!

Vlad

Post Reply