Fuji S2 Pro profiles in the works
Posted: Thu Mar 18, 2004 8:29 pm
FYI:
I'm creating the following noise profiles for the Fuji S2 Pro:
(1) Lighting: cloudy/indoors/window light; WB: auto
(2) Lighting: cloudy/indoors/window light; WB: cloudy
(3) Lighting: cloudy/indoors/window light; WB: custom
(4) Lighting: incandescent; WB: auto
(5) Lighting: incandescent; WB: incandescent
(6) Lighting: incandescent; WB: custom
All are ISO 1600 (noise is so low below that I'm not going to bother with other ISOs). I'm using the calibration target available on this site, printed from PS CS to an Epson 2200 on Enhanced Matte paper. Lens is a Nikon 28-70 f2.8. Neat Image version 3.17.
I'm creating the following noise profiles for the Fuji S2 Pro:
(1) Lighting: cloudy/indoors/window light; WB: auto
(2) Lighting: cloudy/indoors/window light; WB: cloudy
(3) Lighting: cloudy/indoors/window light; WB: custom
(4) Lighting: incandescent; WB: auto
(5) Lighting: incandescent; WB: incandescent
(6) Lighting: incandescent; WB: custom
All are ISO 1600 (noise is so low below that I'm not going to bother with other ISOs). I'm using the calibration target available on this site, printed from PS CS to an Epson 2200 on Enhanced Matte paper. Lens is a Nikon 28-70 f2.8. Neat Image version 3.17.