Page 1 of 1

Problem with Batch profiling

Posted: Tue Nov 10, 2009 2:33 pm
by janarne
Hello,
i wanted to make profiles in a batch, it works BUT not i need an option to make profiles only if the quality is for example at least 90%.
(otherwise don't make a profile)
Because i figured out in neat every percent counts for quality.
The second problem is there is no way to manage in or outside neat the Profiles with priority of ProfileQuality like i need it.
For example an FileEditor in Neat to view the Profiles in a list which they can be sortet by Camera,ISO,Quality,Shutterspeed and so on.

OR

the easier way is that neat shoud writea tag with in the Filename for Profilequaliy like this:

FinePix S602 ZOOM (Q90) (ISO200; 3bpp; SharpNormal; 2832x2128; WB code(12); 1by210s).dnp

where (Q90) stands for profilequality of 90 percent.
(This should be the first tag, because only this way it could be sortet in the windows explorer be name/quality)

the normal file i get is only:
FinePix S602 ZOOM (ISO200; 3bpp; SharpNormal; 2832x2128; WB code(12); 1by210s).dnp

I don't know if this 2 things are easy to solve or my questions are better in the feature-request part of this forum.

greets

Posted: Tue Nov 10, 2009 8:52 pm
by NITeam
Yes, this is a feature suggestion. Thank you for this suggestion, we will certainly consider it. I will move this thread to the corresponding section of the forum.

Thank you!
Vlad

Posted: Wed Nov 11, 2009 4:45 pm
by janarne
thank you,
i would update my licence from home to pro if you could improve the batchprofiler.

greets

update

Posted: Tue Dec 08, 2009 4:11 pm
by janarne
I want to update my suggestion,
i think the quality-tag should stand at the and of the filename like this

E-420 (ISO800; SharpNormal; 3648x2736; WB code (14); 1by400s; Q096).dnp


and should look like Qxxx / for example Q096 (and not Q96)

I am make actually a profile set by hand and i added the Q-Tag to get an overview what i have.

greets from greece

Posted: Sat Apr 03, 2010 2:23 pm
by janarne
Hello NiTeam
it is now about 8 months ago, and i want to ask if it is posibbe that this feature (i mean the Quality-Tag at the end of the FileName) could be implemented in future (maybe in 6.2 or 6.3) because i still needed very much, and i think it should be not so difficult to implement this feature.

greets from Germany

No answer?

Posted: Sun Mar 13, 2011 12:05 am
by janarne
Dear NI-team i am really dissapointed that i didnt get an answer, it is now 19 Months (!) ago, and i still need a feature like a small Q-Tag in the Profilename. I am sure this is usefull also for other users and really easy to do with a tiny variable/codepiece. I also said i Update to Pro when u could arrange it. (So you benefit also).

greets , and i hope i get an answer

Posted: Sun Mar 13, 2011 12:57 am
by NITeam
We have been very busy with other new features that were requested by Neat Image users much more frequently, so this particular feature was not yet implemented (btw, we received no requests from other users about it so far). We have been working on some new stuff for Neat Image and we will try to get back to the issues you mentioned a bit later, probably using a somewhat different solution to the problem you originally described.

Thank you,
Vlad

Posted: Tue Mar 22, 2011 7:40 pm
by janarne
Ok, thanks or the answer.

My main problem is that there is no possibillity to see the Quality of a profile file without to open the file
(all other things like ISO , Shutterspeed an d others are in the file name.)
And the quality of a Profile is the most important parameter of all, so i think there is no reason why it is not a good idea to take it on board.

greets

THX++

Posted: Thu May 12, 2011 6:38 pm
by janarne
Thank You for adding the quality-tag feature in neat image 7.0 !!!
that is really great, it saves a lot of time for example:
manual profiling+ renaming the profiles: 2 Hours
the same stack in Batchmode about 1,5 Minutes!
i will update in june

THX++