Auto Match Profile Bug found (?)
Posted: Tue Dec 08, 2009 3:57 pm
Hello,
i think i found a bug in the function of the "Auto Match Profile" in NeatImage.
When i have load an image an i use the "Auto Match Profile" function
with a profile Set which has several Profiles which would match for that image, because all parameters are right, Neat just takes the first Profile instead of the Profile with the best Profile Quality.
Because my english is not so good here is an example:
To ensure it is a bug i set in the options menu the path to a folder which has only
3 Profiles which all would Match by 100% but with differnt Profile qualitiy:
E-420 (ISO800; SharpNormal; 3648x2736; WB code (14); 1by400s).PB142332.dnp
E-420 (ISO800; SharpNormal; 3648x2736; WB code (14); 1by400s).PB141252.dnp
E-420 (ISO800; SharpNormal; 3648x2736; WB code (14); 1by400s).PB142266.dnp
The first Profile has the Profile Quality of 91% and match by 100% to the image i want to proceed,
the second Profile has the Profile Quality of 95% and match by 100%,
the third Profile has the Profile Quality of 96% and match by 100%.
(I checked the quality by manual load the profile and notice it)
When i used now the auto Match function with this Folder which has these 3 similar Profiles in it which all match by 100% but differnt Profile Qualities, Neat does NOT use the best Profile with the highest quality - it uses the first profile which match.
It would be very helpful when Neat uses the best profile and not the first which match, in a future neat version.
greets from greece
i think i found a bug in the function of the "Auto Match Profile" in NeatImage.
When i have load an image an i use the "Auto Match Profile" function
with a profile Set which has several Profiles which would match for that image, because all parameters are right, Neat just takes the first Profile instead of the Profile with the best Profile Quality.
Because my english is not so good here is an example:
To ensure it is a bug i set in the options menu the path to a folder which has only
3 Profiles which all would Match by 100% but with differnt Profile qualitiy:
E-420 (ISO800; SharpNormal; 3648x2736; WB code (14); 1by400s).PB142332.dnp
E-420 (ISO800; SharpNormal; 3648x2736; WB code (14); 1by400s).PB141252.dnp
E-420 (ISO800; SharpNormal; 3648x2736; WB code (14); 1by400s).PB142266.dnp
The first Profile has the Profile Quality of 91% and match by 100% to the image i want to proceed,
the second Profile has the Profile Quality of 95% and match by 100%,
the third Profile has the Profile Quality of 96% and match by 100%.
(I checked the quality by manual load the profile and notice it)
When i used now the auto Match function with this Folder which has these 3 similar Profiles in it which all match by 100% but differnt Profile Qualities, Neat does NOT use the best Profile with the highest quality - it uses the first profile which match.
It would be very helpful when Neat uses the best profile and not the first which match, in a future neat version.
greets from greece