Apple Silicon GPU support?
Apple Silicon GPU support?
Hi there, I just got my MacBook Pro M1 Max and wanted to test it via Neatbench. The result is...ok: 22fps for the maxed out version. That's equal to my Mac Pro 2013 with Dual D700.
But I saw that Neatbench doesn't use the M1 Max GPU. Is there any support planned?
Thanks
But I saw that Neatbench doesn't use the M1 Max GPU. Is there any support planned?
Thanks
Re: Apple Silicon GPU support?
Yes, we work on that now. The GPU part of M1 Max will likely perform better than the CPU part.
Vlad
Vlad
Re: Apple Silicon GPU support?
Neat
Thanks Vlad!
Thanks Vlad!
Re: Apple Silicon GPU support?
Glad to hear this! I've also just got my M1 Max up-and-running.
And, already the Max with the CPU only significantly outperforms my 2019 iMac with a Vega 48. All these advancements with Metal, the Second Revision, the processing efficiency is amazing. Already so impressed prior to the GPU's coming online.
Thanks for your work, Vlad and team.
And, already the Max with the CPU only significantly outperforms my 2019 iMac with a Vega 48. All these advancements with Metal, the Second Revision, the processing efficiency is amazing. Already so impressed prior to the GPU's coming online.
Thanks for your work, Vlad and team.
-
- Posts: 2
- Joined: Wed Nov 03, 2021 5:02 am
Re: Apple Silicon GPU support?
I am doing some testing myself on my new 14" MBP (10-core CPU, 14-core GPU) and the results I'm getting are...not good. I regularly use Neat to clean up older sermons shot in HDV and destined for broadcast. Normally, a 20-minute sermon takes about 2 hours to render out with Neat on my 27" iMac (8-core i9). I ran a test on one sermon and was pleased to see it finish in about an hour and ten minutes. However, on my second test (different timeline) I am getting much slower results, well over 5 hours. I did the math and that comes out to about 2-3 fps, even though when I do a speed check in the plugin it shows me between 10 and 15 fps. I've tried turning off all other effects and just applying NR to the base video, and I have tried building a new noise profile three times with different settings, and am getting the same results each time. I have also done the optimization check in the plugin so I know it should be using all 10 cores. I'm not using high quality or any other settings that would likely result in much longer render times, I'm just building an automatic profile and using that. Is there something I'm missing here? Could it just be this particular clip that's causing it to go much slower, or is something else going on?
edit - I should also mention that during rendering the CPU load never goes above 60% and the fans never kick on. However, during my first test that went much faster the fans were going full throttle the entire time.
edit - I should also mention that during rendering the CPU load never goes above 60% and the fans never kick on. However, during my first test that went much faster the fans were going full throttle the entire time.
Re: Apple Silicon GPU support?
If the type of footage is different in two tests, then FCP may read those clips with different speed. That is one option.
If the frame size of the clips (or project) is different in two tests, that can be the key factor as well.
Please run the Optimize Settings test in both projects and post the whole logs from that window here to let me see the details.
Thank you,
Vlad
If the frame size of the clips (or project) is different in two tests, that can be the key factor as well.
Please run the Optimize Settings test in both projects and post the whole logs from that window here to let me see the details.
Thank you,
Vlad
-
- Posts: 2
- Joined: Wed Nov 03, 2021 5:02 am
Re: Apple Silicon GPU support?
The two clips are almost identical, they were shot with the same camera in the same location and are nearly the same length, and both are mostly just a static shot of a preacher behind an altar so there should be very little difference in content between them. The only real difference is the actual preacher.
Actually upon further testing I think there may have been some process that was holding up some of the cores on my machine. I tried restarting and testing again, and now I'm getting the faster results I had with the first clip. I'll update my post if I see the issue crop up again, but for now I think I can chalk it up as a fluke. I hope.
Actually upon further testing I think there may have been some process that was holding up some of the cores on my machine. I tried restarting and testing again, and now I'm getting the faster results I had with the first clip. I'll update my post if I see the issue crop up again, but for now I think I can chalk it up as a fluke. I hope.
Re: Apple Silicon GPU support?
Thank you for the update. I hope the speed will be the same in both cases.
Could you post the result of Optimize Settings test still? We haven't yet seen the results from the Pro version of the CPU.
Thank you,
Vlad
Could you post the result of Optimize Settings test still? We haven't yet seen the results from the Pro version of the CPU.
Thank you,
Vlad
Re: Apple Silicon GPU support?
Now that you post your first internal results of the GPU speeds, my question is:
Why ist CPU+GPU on M1 Max slower than GPU alone?
Why ist CPU+GPU on M1 Max slower than GPU alone?
Re: Apple Silicon GPU support?
This often happens when the GPU is significantly faster than CPU. It is just more efficient to let the GPU do the job and not bother with the CPU.
Vlad
Vlad
Re: Apple Silicon GPU support?
Hi!
Have you posted results of M1 Pro and M1 Max GPU bench somewhere?
I only see the CPU speeds in the main Neatbench page.
I am very interested.
Many thanks
Luca
Have you posted results of M1 Pro and M1 Max GPU bench somewhere?
I only see the CPU speeds in the main Neatbench page.
I am very interested.
Many thanks
Luca
Re: Apple Silicon GPU support?
It's on Twitter
Re: Apple Silicon GPU support?
It is on Facebook: click the [f] icon in the signature.
Re: Apple Silicon GPU support?
Thanks found!
So finally not a big difference between CPU+GPU on the M1 PRO vs GPU only on the M1 MAX.
Really not worth the extra money.
Dear Vlad,
Have you tested also the CPU+GPU or just GPU on the old M1?
I own a Macbook air M1 and I would like to know if it's worth to update at least on the M1 PRO.
Thanks
So finally not a big difference between CPU+GPU on the M1 PRO vs GPU only on the M1 MAX.
Really not worth the extra money.
Dear Vlad,
Have you tested also the CPU+GPU or just GPU on the old M1?
I own a Macbook air M1 and I would like to know if it's worth to update at least on the M1 PRO.
Thanks
Re: Apple Silicon GPU support?
M1 CPU+GPU is almost the same as M1 CPU alone. GPU is slower than the CPU.
M1 Pro appears to be about 2 -- 2.5 times faster than M1.
Vlad
M1 Pro appears to be about 2 -- 2.5 times faster than M1.
Vlad